Kauf der Heizpatrone un die Extruder-Oberteil

[vikram.swain]

HeatBlock.png

Extruder Upper Part.png

Sorry for writing in English, as my german is not that great.

Can anybody let me know from where can I get the heating cartridge(die Heizpatrone) and the Extruder upper part(Extruder-Oberteil) for RF2000? I checked the conrad website but it wasn't available. If anybody can help me with this will be much appreciated.

[Digibike]

Hi,

are you sure, that this is orginal? On Orginal Hotends from Conrad, you can not chose the heating cartridge. It is poured in, Conrad has reduce the spare parts for this Printer. The reason, why most of use changed the Hotend to E3D Hotends...
There are many threads about this Changes.
Sorry, that I can not write something a little bit better about this problem.

Christian

[vikram.swain]

Yes the parts which is damaged is original and the picture which I have attached is from the manual.

For the solution of my above problem, should I change the hotend to a different E3D Hotends? Please let me know what should I do.

Vikram

[af0815]

Looks like a RF2000V2 Hotend V3. This was the last used Hotend by Conrad. Not available anymore, the same for spare parts.

I have build two different Hotends compatible with the orioginal in length. A E3D-V6 and E3D-Vulcano a picture of both you can see in theread here viewtopic.php?f=72&t=2893&start=40

E3D-V6:
Ok, but you must make a new construction for the part-cooler-fans
You must made some changes in the parts (possible with a good stand drilling machine and taps)

E3D-Vulcano:
Compatible with the original part-cooler-fan
You have make a new part for connecting the threaded Heatsink

On both soloutions you have to insert new wires for the new cooling fans of the Heatsink

BTW: I your printer a single or dual ?